Control, visualise and communicate in the smallest space. The most compact way to automate – and with INSEVIS S7 panel PLCs, also the most economical. IP65-sealed, metal housing, programmable in STEP®7 with SimaticManager V5.5 or Siemens’ TIA Portal. Equipped with extensive communication channels such as Ethernet, Modbus, CAN, RS232 and RS485, as well as Profibus DP and Profinet IO Controller. With onboard and/or decentralised I/O in fine increments.
Select a display diagonal. The selection remains active until you switch to another model.
Home » Products » Panel PLC » 3.5″ with PLC V/-P
You have to look twice: A small 3.5" touch panel and an S7 PLC built very compactly. The external peripherals are accessed via the many interfaces. Often used as an entry-level model or for additional display and operating devices in the S7 control network. In addition to the decent RAM (512/640kB), the interfaces Ethernet (S7 communication, TCP, UDP), Modbus (-TCP and -RTU, CAN (CANopen and Layer2), RS232 and RS485 (free ASCII) and optionally Profibus DP V0 (-master and -slave) favor the device for use as a data logger or gateway with data preprocessing.
| Order number | Designation |
| PC350V-0-03 | 3.5″ Panel PLC PC350V |
| PC350V-DPM-03 | 3.5″ Panel PLC PC350V Profibus Master |
| PC350V-DPS-03 | 3.5″ Panel PLC PC350V Profibus Slave |
| PC350P-0-03 | 3.5″ Panel PLC PC350P |
| PC350P-DPM-03 | 3.5″ Panel PLC PC350P Profibus Master |
| PC350P-DPS-03 | 3.5″ Panel PLC PC350P Profibus Slave |
Welcome to the smallest S7 touch panel PLC with onboard peripherals in the world! 4 digital and 2 analog inputs or outputs are hidden under the compact rear panel. More are of course possible in a decentralized manner. The brilliant image and extremely compact dimensions favor these devices for small solutions, which can, however, be performance giants. With a depth of just 50mm, it is ultra-compact and yet with Ethernet (S7 communication, TCP and UDP), Modbus (-TCP and -RTU), CAN (CANopen and Layer2) as well as RS232 and RS485 (free ASCII) and optional Profibus DP V0 master and slave, the device is a true communications miracle.
| Order number | Designation |
| PC350V-0-03 | 3.5″ Panel PLC PC350V |
| PC350V-DPM-03 | 3.5″ Panel PLC PC350V Profibus Master |
| PC350V-DPS-03 | 3.5″ Panel PLC PC350V Profibus Slave |
| PC350P-0-03 | 3.5″ Panel PLC PC350P |
| PC350P-DPM-03 | 3.5″ Panel PLC PC350P Profibus Master |
| PC350P-DPS-03 | 3.5″ Panel PLC PC350P Profibus Slave |
If you want to address a lot of peripherals in a modular way in a very small space, this S7 panel PLC, which is only 89 mm deep, is the perfect choice. Up to 48 digital or 30 analog inputs or outputs fit under the high-quality rear panel. This solution often replaces the aging C7 devices and gives machines a second life. Thanks to the large RAM (512/640kB) and the many interfaces such as Ethernet (S7 communication, TCP and UDP), Modbus (-TCP and -RTU, CAN (CANopen and Layer2) as well as RS232 and RS485 (free ASCII) and optional Profibus DP V0 master and slave, these devices are favored as data loggers, BDE devices and gateways with S7-programmable data preprocessing.
| Order number | Designation |
| PC353V-0-03 | 3.5″ Panel PLC PC353V |
| PC353V-DPM-03 | 3.5″ Panel PLC PC353V Profibus Master |
| PC353V-DPS-03 | 3.5″ Panel PLC PC353V Profibus Slave |
| PC353P-0-03 | 3.5″ Panel PLC PC353P |
| PC353P-DPM-03 | 3.5″ Panel PLC PC353P Profibus Master |
| PC353P-DPS-03 | 3.5″ Panel PLC PC353P Profibus Slave |
Home » Products » Panel PLC » 4.3″ with PLC T
26mm installation depth for an S7 panel PLC – world record! S7 power dwarfs with a brilliant and very fast touch display with 480x272px. And always S7 programmable with the well-known Siemens tools SimaticManager and TIA Portal. If you need CPU performance and memory and don't have to display much, you've found your S7 controller here. Whether as a stand-alone device or additional display and operating devices in the S7 control network. In two versions: 26mm installation depth without and 45mm installation depth with Profinet. Both have 2 separate Ethernet (S7 communication Put/Get, TCP, UDP), Modbus -TCP and -RTU), CAN (CANopen and Layer2), RS232 and RS485 (free ASCII). A 4-way VNC server is also included.
| Order number | Designation |
| PC430T-0-03 | 4.3″ Panel PLC PC430T |
| PC430T-PNC-02 | 4.3″ Panel PLC PC430T Profinet I/O Controller |
When the world’s most compact S7 touch-panel PLC is expanded with a peripheral board, the result is once again a world record! In a further 17 millimetres, INSEVIS engineers have accommodated an incredible 12 digital I/Os (of course switchable, PWM and push-pull), 12 counting digital inputs, 3 analogue channels (individually configurable as inputs or outputs and each for current or voltage) and 3 analogue inputs for current or voltage, RTD, thermocouple or strain gauge), RESPECT! Naturally, the interfaces have remained: 2 separate Ethernet (S7 communication Put/Get, TCP, UDP), Modbus TCP and RTU), CAN (CANopen and Layer 2), RS232 and RS485 (free ASCII). A 4-way VNC server is also already included.
| Order number | Designation |
| PC431T-0-02 | 4.3″ Panel PLC PC431T with fixed I/Os |
Designed for use in the tightest of spaces: the PC433T, which is less than 90mm deep and can also accommodate up to 48 digital or 30 analog inputs or outputs. It can be installed horizontally or vertically, with the connector level inclined towards the cable duct. Field devices are addressed via the onboard interfaces Modbus-TCP and -RTU), CAN (CANopen and Layer2) as well as RS232 and RS485 (free ASCII). The two separately configurable Ethernet interfaces enable integration into separate networks. The brilliant and extremely fast touch displays can be used horizontally and vertically, there are no restrictions on visualization or remote access. A 4-way VNC server is also included.
| Order number | Designation |
| PC433T-0-02 | 4.3″ Panel PLC PC433T |
| PC433T-PNC-02 | 4.3″ Panel PLC PC433T with Profinet I/O Contr. |
Home » Products » Panel PLC » 5.7″ with PLC V/-P
If you miss the well-known TP/MP170 panel format, this module is not only a replacement, but it also has the S7 CPU integrated! And a very powerful one with a large working, loading and visualization memory and a good number of interfaces: Ethernet (S7 communication, TCP and UDP), Modbus (TCP and RTU), CAN (CANopen and Layer2) as well as RS232 and RS485 (free ASCII) and optionally Profibus DP V0 master and slave. This is why this small panel PLC is a true communications miracle. Decentralized peripherals, communication with control systems, remote visualization, everything is easy to configure and parameterize.
| Order number | Designation |
| PC570V-0-03 | 5.7″ Panel PLC PC570V |
| PC570V-DPM-03 | 5.7″ Panel PLC PC570V Profibus Master |
| PC570V-DPS-03 | 5.7″ Panel PLC PC570V Profibus Slave |
| PC570P-0-03 | 5.7″ Panel PLC PC570P |
| PC570P-DPM-03 | 5.7″ Panel PLC PC570P Profibus Master |
| PC570P-DPS-03 | 5.7″ Panel PLC PC570P Profibus Slave |
Workhorse, bread and butter control, performance miracle. No other INSEVIS panel PLC has been at home in so many series products for years as this module, which is only 95 mm deep and can accommodate up to 112 digital or 72 analog I/Os under the solidly manufactured rear panel. If that is not enough, there are enough interfaces for other external modules: Ethernet (S7 communication, TCP and UDP), Modbus (-TCP and -RTU), CAN (CANopen and Layer2) as well as RS232 and RS485 (free ASCII) and optionally Profibus DP V0 master and slave. Not bad for the size, right? Of course, optionally with customer logo. On the back or in the firmware.
| Order number | Designation |
| PC577V-0-03 | 5.7″ Panel PLC PC577V |
| PC577V-DPM-03 | 5.7″ Panel PLC PC577V Profibus Master |
| PC577V-DPS-03 | 5.7″ Panel PLC PC577V Profibus Slave |
| PC577P-0-03 | 5.7″ Panel PLC PC577P |
| PC577P-DPM-03 | 5.7″ Panel PLC PC577P Profibus Master |
| PC577P-DPS-03 | 5.7″ panel PLC PC577P Profibus slave |
Home » Products » Panel PLC » 7″ with PLC-T
The new standard in 16:9 format with 800x480 pixel resolution and only 45mm thick. Decentralized field devices are connected via the onboard interfaces Modbus (-TCP and -RTU), CAN (CANopen and Layer2), RS232 and RS485 (free ASCII). The two separately configurable Ethernet interfaces enable integration into your customer's machine network and at the same time provide you with service access in a separate network. There are 2 device versions; one with and one without a Profinet IO controller. The brilliant touch displays can be used horizontally or vertically. There are no restrictions on visualization or remote access. A 4-way VNC server is already integrated.
| Order number | Designation |
| PC710T-0-03 | 7″ Panel PLC PC710T |
| PC710T-PNC-02 | 7″ panel PLC PC7100T Profinet I/O controller |
INSEVIS shows how to bring 12 digital inputs or outputs, 12 counting inputs, 3 analog channels, each of which can be individually configured as an input or output and for current or voltage, and another 3 analog inputs, which can be almost anything, onto a 7" panel PLC with this panel PLC with a depth of just 44 (!) mm. Decentralized field devices are connected via the onboard interfaces Modbus (-TCP and -RTU), CAN (CANopen and Layer2), RS232 and RS485 (free ASCII). The two separately configurable Ethernet interfaces enable integration into your customer's machine network and at the same time provide you with service access in a separate network.
| Order number | Designation |
| PC711T-0-02 | 7″ panel PLC PC710T with fixed I/Os |
If you integrate 7 slots for onboard peripherals into the PC710T, you get the extremely compact PC717T panel PLC with a depth of 95mm. The 7 slots are sufficient for up to 112 digital or 70 analog inputs or outputs. The rest is addressed via the onboard interfaces Modbus (-TCP and -RTU), CAN (CANopen and Layer2), RS232 and RS485 (free ASCII). Here too, the two separately configurable Ethernet interfaces enable the device to be integrated into your customer's machine network and at the same time provide you with service access in your own network. The obligatory 4-way VNC server is of course also onboard.
| Order number | Designation |
| PC717T-0-02 | 7″ panel PLC PC710T |
| PC717T-PNC-02 | 7″ panel PLC PC710T with Profinet I/O controller |
Home » Products » Panel PLC » 10.1″ with PLC-T
The S7 panel PLC PC1010T has a high-resolution, brilliant touch display with 1024×600 pixels and plenty of space for objects per page. Not unimportant at this size: no runtime license or PowerTag costs hinder the realization of your visualization ideas. There is also an integrated 4-way VNC server. Now in 2 device versions; one with and one without Profinet. Like all flat S7 panel PLCs, ideal for a solution with remote peripherals. The simplest peripheral connection is of course with INSEVIS peripherals, but all other third-party peripherals with Modbus TCP and RTU, CANopen, Ethernet or Profinet interfaces can also be easily mapped.
| Order number | Designation |
| PC1010T-0-02 | 10.1″ Panel PLC PC1010T |
| PC1010T-PNC-02 | 10.1″ panel PLC PC1010T Profinet I/O controller |
If you need a compact design and only require a few inputs or outputs, this module is the ideal choice: the well-known S7 Panel PLC PC1010T with its high-resolution, brilliant touch display with 1024×600 pixels and powerful T-CPU with 2x Ethernet, Modbus TCP and RTU, RS232 and RS485 and, of course, the CANopen master interface includes, in the PC1011T, 12 digital inputs or outputs on the rear, 12 counting inputs and 3 analogue channels, each of which can be configured as an input or output and for either current or voltage. In addition, there are 3 analogue inputs for current, voltage, RTD, thermocouples and strain gauges, all within an incredible installation depth of 48 mm.
| Order number | Designation |
| PC1011T-0-02 | 10.1″ panel PLC PC1011T with fixed I/Os |
If you integrate 7 slots for onboard peripherals into the PC1010T, you get the extremely compact PC1017T panel PLC with a depth of 98mm. The 7 slots are sufficient for up to 112 digital or 70 analog I/Os. Often only a few I/Os are used for the onboard handheld controls. The rest are addressed via the onboard interfaces Modbus (-TCP and -RTU), CAN (CANopen and Layer2), RS232 and RS485 (free ASCII). Here too, the two separately configurable Ethernet interfaces enable the device to be integrated into your customer's machine network and at the same time provide you with service access.
| Order number | Designation |
| PC1017T-0-02 | 10.1″ panel PLC PC1010T |
| PC1017T-PNC-02 | 10.1″ panel PLC PC1010T with Profinet I/O controller |
Home » Products » Panel PLC » 15.6″ with PLC-T
The PC1560T panel PLC has the largest diagonal currently available at 15.6" with 1366x768 pixels. Not unimportant at this size: With INSEVIS, no runtime license costs hinder the realization of your visualization ideas and the whole thing can be updated even after years, even without a PC as an aid. A 4-way VNC server is integrated. Like all flat panel PLCs, it is ideal for a solution with remote peripherals. The simplest peripheral connection is of course with INSEVIS peripherals, but all other third-party peripherals with Modbus, CAN, Ethernet or Profinet interfaces can also be easily mapped. If desired, with your own firmware with your logo permanently burned in - this will set you apart from your competition.
| Order number | Designation |
| PC1560T-0-02 | 15.6″ Panel PLC PC1560T |
| PC1560T-PNC-02 | 15.6″ panel PLC PC1560T Profinet I/O controller |
The PC1561T panel PLC expands the well-known PC1560T panel PLC with the fixed peripheral module already used in smaller devices with 12 digital inputs or outputs (switchable bit by bit and with PWM and push-pull functions), 12 digital inputs (counter with 1kHz/100kHz), 3 analog channels (each input or output and each for current or voltage) and 3 further analog inputs for current, voltage, RTD, thermocouples and strain gauges. The incredibly flat design of just 54mm allows many applications with particularly compact requirements.
| Order number | Designation |
| PC1561T-0-02 | 15.6″ panel PLC PC1561T with fixed I/Os |
If you integrate 7 slots for onboard peripherals into the PC1560T, you get the extremely compact PC1567T panel PLC with a depth of 104 mm. The 7 slots are sufficient for up to 112 digital or 70 analog I/Os, the rest is addressed via the onboard interfaces Modbus (TCP and RTU), CAN (CANopen and Layer2), RS232 and RS485 (free ASCII). Here too, the two separately configurable Ethernet interfaces enable the device to be integrated into your customer's machine network and at the same time provide you with service access. Labeling the firmware with the customer's logo is possible from a quantity of 1.
| Order number | Designation |
| PC1567T-0-02 | 15.6″ panel PLC PC1567T |
| PC1567T-PNC-02 | 15.6″ panel PLC PC1567T with Profinet I/O controller |
